Jasic EVO CUT 45SC PFC Plasma Cutter | 110/230V
Jasic EVO CUT 45SC PFC Plasma Cutter | 110/230V
The Jasic EVO CUT 45SC is a portable wide-voltage plasma cutter with an integrated compressor, allowing professional cutting where a separate workshop air supply is unavailable. It operates across AC 95–265V supplies and delivers up to 30A on 115V or 45A on 230V.
ClearVision digital control, SurePlasma non-HF ignition and selectable 2T, 4T and mesh-cutting modes provide straightforward setup for steel, stainless steel, copper, cast iron and aluminium. PFC improves input efficiency and supports operation from a correctly sized AVR generator. Fan-on-demand cooling, Active Balancing Air Passage and IP23S protection support regular workshop and site use.
Key specifications:
• 20–30A output on 115V; 20–45A on 230V
• Clean cut: 5mm at 115V; 12mm at 230V
• Severance cut: 10mm at 115V; 20mm at 230V
• 25% duty cycle at 40°C
• Integrated compressor
• Non-HF pilot-arc ignition
Package contents:
• EVO CUT 45SC power source with compressor
• 6m plasma cutting torch
• 3m earth clamp and lead
3–5 working day deliveryAvailable to order
Free UK delivery over £75 ex VATStandard mainland delivery terms apply
Straightforward returnsRead our returns policy
UK warranty supportHelp from our experienced team
Genuine means genuine
Original parts. Proper fit. No unbranded substitutes.
When a listing carries one of these manufacturer names, we supply the genuine branded product—not an unbranded lookalike or inferior copy. That gives professional welders confidence in compatibility, rated performance and product traceability.
Shop genuine MIG torches & parts- ABICOR BINZEL
- Miller
- Migatronic
- Bernard
- Tregaskiss
Trade-focused supplyProfessional equipment, parts and consumables.
Clear availabilityStock and expected lead times made clear.
Compatible accessories & useful extras
Continue browsing
Recently viewed
Essential specifications
Key facts at a glance
The principal information needed to compare this product quickly. Full technical data is shown below.
- Processes
- Plasma cutting
- Input voltage
- 110V / 230V
- Maximum output
- 45A
- Duty cycle
- 25% @ 40°C
Product overview
Product information
The Jasic EVO CUT 45SC is a portable wide-voltage plasma cutter with an integrated compressor, allowing professional cutting where a separate workshop air supply is unavailable. It operates across AC 95–265V supplies and delivers up to 30A on 115V or 45A on 230V.
ClearVision digital control, SurePlasma non-HF ignition and selectable 2T, 4T and mesh-cutting modes provide straightforward setup for steel, stainless steel, copper, cast iron and aluminium. PFC improves input efficiency and supports operation from a correctly sized AVR generator. Fan-on-demand cooling, Active Balancing Air Passage and IP23S protection support regular workshop and site use.
Key specifications:
• 20–30A output on 115V; 20–45A on 230V
• Clean cut: 5mm at 115V; 12mm at 230V
• Severance cut: 10mm at 115V; 20mm at 230V
• 25% duty cycle at 40°C
• Integrated compressor
• Non-HF pilot-arc ignition
Package contents:
• EVO CUT 45SC power source with compressor
• 6m plasma cutting torch
• 3m earth clamp and lead
The Jasic EVO CUT 45SC is a portable wide-voltage plasma cutter with an integrated compressor, allowing professional cutting where a separate workshop air supply is unavailable. It operates across AC 95–265V supplies and delivers up to 30A on 115V or 45A on 230V.
ClearVision digital control, SurePlasma non-HF ignition and selectable 2T, 4T and mesh-cutting modes provide straightforward setup for steel, stainless steel, copper, cast iron and aluminium. PFC improves input efficiency and supports operation from a correctly sized AVR generator. Fan-on-demand cooling, Active Balancing Air Passage and IP23S protection support regular workshop and site use.
Key specifications:
• 20–30A output on 115V; 20–45A on 230V
• Clean cut: 5mm at 115V; 12mm at 230V
• Severance cut: 10mm at 115V; 20mm at 230V
• 25% duty cycle at 40°C
• Integrated compressor
• Non-HF pilot-arc ignition
Package contents:
• EVO CUT 45SC power source with compressor
• 6m plasma cutting torch
• 3m earth clamp and lead
Technical data
Technical specifications
| Air requirement | Integrated compressor |
|---|---|
| Maximum output | 45A |
| Arc ignition | Non-HF pilot arc |
| Clean cut capacity | 11–20 mm |
| Clean cut capacity details | 5mm @ 115V; 12mm @ 230V (carbon steel) |
| Cnc interface | Optional CNC wiring kit |
| Compressor included | Yes |
| Current range | 20–30A @ 115V; 20–45A @ 230V |
| Cutting modes | 2T, 4T, mesh cutting |
| Dimensions (L × W × H) | 548 × 187 × 558mm |
| Duty cycle | 25% @ 40°C |
| Generator requirement | 6.5kVA @ 115V / 9.5kVA @ 230V; AVR required |
| Input supply details | AC 95–265V, 50/60Hz |
| Minimum order quantity | 1 |
| Power factor correction | Yes |
| Protection class | IP23S |
| Severance cut capacity | 10mm @ 115V; 20mm @ 230V (carbon steel) |
| Torch length | 6m |
| Input voltage | 110V / 230V |
| Weight | 26.5kg |
| Welding processes | Plasma cutting |