Jasic EVO CUT 80 Plasma Cutter Package | 415V
Jasic EVO CUT 80 Plasma Cutter Package | 415V
The Jasic EVO CUT 80 is a professional three-phase plasma cutting inverter for workshop fabrication, maintenance and mechanised cutting applications. It delivers a 20–80A cutting range with non-HF pilot-arc ignition and a standard 14-pin CNC interface.
ClearVision control, SurePlasma ignition technology and selectable 2T, 4T and mesh-cutting modes support accurate setup and reliable starts. At 400mm/min, the manufacturer rates the machine for a 25mm clean cut in carbon steel, with a 35mm severance capacity and 20mm piercing capacity. Fan-on-demand cooling, auto sleep and IP23S protection improve usability in industrial environments.
Key specifications:
• 400/415V three-phase input
• 20–80A output range
• 40% duty cycle at 80A and 40°C
• 25mm clean cut; 35mm severance cut
• 20mm pierce capacity
• 14-pin CNC interface
Package contents:
• EVO CUT 80 power source
• 6m UPH-125 cutting torch
• 3m earth clamp and lead
3–5 working day deliveryAvailable to order
Free UK delivery over £75 ex VATStandard mainland delivery terms apply
Straightforward returnsRead our returns policy
UK warranty supportHelp from our experienced team
Genuine means genuine
Original parts. Proper fit. No unbranded substitutes.
When a listing carries one of these manufacturer names, we supply the genuine branded product—not an unbranded lookalike or inferior copy. That gives professional welders confidence in compatibility, rated performance and product traceability.
Shop genuine MIG torches & parts- ABICOR BINZEL
- Miller
- Migatronic
- Bernard
- Tregaskiss
Trade-focused supplyProfessional equipment, parts and consumables.
Clear availabilityStock and expected lead times made clear.
Compatible accessories & useful extras
Continue browsing
Recently viewed
Essential specifications
Key facts at a glance
The principal information needed to compare this product quickly. Full technical data is shown below.
- Processes
- Plasma cutting
- Input voltage
- 400/415V
- Maximum output
- 80A
- Duty cycle
- 80A @ 40% (40°C)
Product overview
Product information
The Jasic EVO CUT 80 is a professional three-phase plasma cutting inverter for workshop fabrication, maintenance and mechanised cutting applications. It delivers a 20–80A cutting range with non-HF pilot-arc ignition and a standard 14-pin CNC interface.
ClearVision control, SurePlasma ignition technology and selectable 2T, 4T and mesh-cutting modes support accurate setup and reliable starts. At 400mm/min, the manufacturer rates the machine for a 25mm clean cut in carbon steel, with a 35mm severance capacity and 20mm piercing capacity. Fan-on-demand cooling, auto sleep and IP23S protection improve usability in industrial environments.
Key specifications:
• 400/415V three-phase input
• 20–80A output range
• 40% duty cycle at 80A and 40°C
• 25mm clean cut; 35mm severance cut
• 20mm pierce capacity
• 14-pin CNC interface
Package contents:
• EVO CUT 80 power source
• 6m UPH-125 cutting torch
• 3m earth clamp and lead
The Jasic EVO CUT 80 is a professional three-phase plasma cutting inverter for workshop fabrication, maintenance and mechanised cutting applications. It delivers a 20–80A cutting range with non-HF pilot-arc ignition and a standard 14-pin CNC interface.
ClearVision control, SurePlasma ignition technology and selectable 2T, 4T and mesh-cutting modes support accurate setup and reliable starts. At 400mm/min, the manufacturer rates the machine for a 25mm clean cut in carbon steel, with a 35mm severance capacity and 20mm piercing capacity. Fan-on-demand cooling, auto sleep and IP23S protection improve usability in industrial environments.
Key specifications:
• 400/415V three-phase input
• 20–80A output range
• 40% duty cycle at 80A and 40°C
• 25mm clean cut; 35mm severance cut
• 20mm pierce capacity
• 14-pin CNC interface
Package contents:
• EVO CUT 80 power source
• 6m UPH-125 cutting torch
• 3m earth clamp and lead
Technical data
Technical specifications
| Air requirement | 200 l/min @ minimum 5 bar |
|---|---|
| Maximum output | 80A |
| Arc ignition | Non-HF pilot arc |
| Clean cut capacity | 21–30 mm |
| Clean cut capacity details | 25mm carbon steel @ 400mm/min |
| Cnc interface | 14-pin CNC interface |
| Current range | 20–80A |
| Cutting modes | 2T, 4T, mesh cutting |
| Dimensions (L × W × H) | 626 × 230 × 416mm |
| Duty cycle | 80A @ 40% (40°C) |
| Generator requirement | AVR generator compatible; size for 12.5kVA rated input |
| Input supply details | 3-phase AC 400V ±15%, 50/60Hz |
| Minimum order quantity | 1 |
| Pierce capacity | 20mm carbon steel |
| Protection class | IP23S |
| Severance cut capacity | 35mm carbon steel |
| Torch length | 6m |
| Torch model | UPH-125 |
| Input voltage | 400/415V |
| Weight | 22kg |
| Welding processes | Plasma cutting |