Jasic EVO CUT 45 PFC Plasma Cutter | 110/230V
Jasic EVO CUT 45 PFC Plasma Cutter | 110/230V
The Jasic EVO CUT 45 PFC is a compact professional plasma cutter for workshop fabrication, maintenance and site work. Its AC 95–265V input range supports both 115V and 230V supplies, producing up to 30A on 115V and 45A on 230V.
The ClearVision display and digital encoder make settings easy to read and adjust. SurePlasma technology provides consistent non-HF pilot-arc ignition, while 2T, 4T and mesh-cutting modes support sheet, perforated material and general fabrication. PFC, AVR-generator compatibility, fan-on-demand cooling and IP23S protection add flexibility for demanding environments.
Key specifications:
• 20–30A output on 115V; 20–45A on 230V
• Clean cut: 6mm at 115V; 15mm at 230V
• Severance cut: 12mm at 115V; 25mm at 230V
• 25% duty cycle at 40°C
• Non-HF pilot-arc ignition
• External clean, dry compressed-air supply required
Package contents:
• EVO CUT 45 PFC power source
• 6m JE60 hand plasma torch
• 3m earth clamp and lead
1–2 working day deliveryIn stock in our UK warehouse
Free UK delivery over £75 ex VATStandard mainland delivery terms apply
Straightforward returnsRead our returns policy
UK warranty supportHelp from our experienced team
Genuine means genuine
Original parts. Proper fit. No unbranded substitutes.
When a listing carries one of these manufacturer names, we supply the genuine branded product—not an unbranded lookalike or inferior copy. That gives professional welders confidence in compatibility, rated performance and product traceability.
Shop genuine MIG torches & parts- ABICOR BINZEL
- Miller
- Migatronic
- Bernard
- Tregaskiss
Trade-focused supplyProfessional equipment, parts and consumables.
Clear availabilityStock and expected lead times made clear.
Compatible accessories & useful extras
Continue browsing
Recently viewed
Essential specifications
Key facts at a glance
The principal information needed to compare this product quickly. Full technical data is shown below.
- Processes
- Plasma cutting
- Input voltage
- 110V / 230V
- Maximum output
- 45A
- Duty cycle
- 25% @ 40°C
Product overview
Product information
The Jasic EVO CUT 45 PFC is a compact professional plasma cutter for workshop fabrication, maintenance and site work. Its AC 95–265V input range supports both 115V and 230V supplies, producing up to 30A on 115V and 45A on 230V.
The ClearVision display and digital encoder make settings easy to read and adjust. SurePlasma technology provides consistent non-HF pilot-arc ignition, while 2T, 4T and mesh-cutting modes support sheet, perforated material and general fabrication. PFC, AVR-generator compatibility, fan-on-demand cooling and IP23S protection add flexibility for demanding environments.
Key specifications:
• 20–30A output on 115V; 20–45A on 230V
• Clean cut: 6mm at 115V; 15mm at 230V
• Severance cut: 12mm at 115V; 25mm at 230V
• 25% duty cycle at 40°C
• Non-HF pilot-arc ignition
• External clean, dry compressed-air supply required
Package contents:
• EVO CUT 45 PFC power source
• 6m JE60 hand plasma torch
• 3m earth clamp and lead
The Jasic EVO CUT 45 PFC is a compact professional plasma cutter for workshop fabrication, maintenance and site work. Its AC 95–265V input range supports both 115V and 230V supplies, producing up to 30A on 115V and 45A on 230V.
The ClearVision display and digital encoder make settings easy to read and adjust. SurePlasma technology provides consistent non-HF pilot-arc ignition, while 2T, 4T and mesh-cutting modes support sheet, perforated material and general fabrication. PFC, AVR-generator compatibility, fan-on-demand cooling and IP23S protection add flexibility for demanding environments.
Key specifications:
• 20–30A output on 115V; 20–45A on 230V
• Clean cut: 6mm at 115V; 15mm at 230V
• Severance cut: 12mm at 115V; 25mm at 230V
• 25% duty cycle at 40°C
• Non-HF pilot-arc ignition
• External clean, dry compressed-air supply required
Package contents:
• EVO CUT 45 PFC power source
• 6m JE60 hand plasma torch
• 3m earth clamp and lead
Technical data
Technical specifications
| Maximum output | 45A |
|---|---|
| Arc ignition | Non-HF pilot arc |
| Clean cut capacity | 11–20 mm |
| Clean cut capacity details | 6mm @ 115V; 15mm @ 230V (carbon steel) |
| Cnc interface | Optional CNC wiring kit |
| Current range | 20–30A @ 115V; 20–45A @ 230V |
| Cutting modes | 2T, 4T, mesh cutting |
| Dimensions (L × W × H) | 546 × 166 × 341mm |
| Duty cycle | 25% @ 40°C |
| Generator requirement | 5.5kVA @ 115V / 8kVA @ 230V; AVR required |
| Input supply details | AC 95–265V, 50/60Hz |
| Minimum order quantity | 1 |
| Power factor correction | Yes |
| Protection class | IP23S |
| Severance cut capacity | 12mm @ 115V; 25mm @ 230V (carbon steel) |
| Torch length | 6m |
| Torch model | JE60 hand plasma torch |
| Input voltage | 110V / 230V |
| Weight | 10kg |
| Welding processes | Plasma cutting |