Jasic EVO CUT 100SC Plasma Cutter with Compressor | 415V
Jasic EVO CUT 100SC Plasma Cutter with Compressor | 415V
The Jasic EVO CUT 100SC is a mobile 100A three-phase plasma cutting package supplied with an integrated compressor and trolley. It gives professional fabricators a self-contained cutting system where workshop compressed air is unavailable, without sacrificing CNC capability or advanced digital control.
ClearVision display technology, SurePlasma non-HF ignition and 2T, 4T and mesh-cutting modes support fast, repeatable setup. The standard 14-pin CNC interface allows use with suitable mechanised systems. With its integrated air system, the machine is rated for a 25mm clean cut in carbon steel at 400mm/min, a 35mm severance cut and a 20mm pierce capacity.
Key specifications:
• 400/415V three-phase input
• 20–100A output range
• 40% duty cycle at 100A and 40°C
• 25mm clean cut; 35mm severance cut
• 20mm pierce capacity
• Integrated compressor and trolley
Package contents:
• EVO CUT 100SC power source
• Integrated compressor and trolley
• 6m UPH-125 cutting torch
• 3m earth clamp and lead
3–5 working day deliveryAvailable to order
Free UK delivery over £75 ex VATStandard mainland delivery terms apply
Straightforward returnsRead our returns policy
UK warranty supportHelp from our experienced team
Genuine means genuine
Original parts. Proper fit. No unbranded substitutes.
When a listing carries one of these manufacturer names, we supply the genuine branded product—not an unbranded lookalike or inferior copy. That gives professional welders confidence in compatibility, rated performance and product traceability.
Shop genuine MIG torches & parts- ABICOR BINZEL
- Miller
- Migatronic
- Bernard
- Tregaskiss
Trade-focused supplyProfessional equipment, parts and consumables.
Clear availabilityStock and expected lead times made clear.
Compatible accessories & useful extras
Continue browsing
Recently viewed
Essential specifications
Key facts at a glance
The principal information needed to compare this product quickly. Full technical data is shown below.
- Processes
- Plasma cutting
- Input voltage
- 400/415V
- Maximum output
- 100A
- Duty cycle
- 100A @ 40% (40°C)
Product overview
Product information
The Jasic EVO CUT 100SC is a mobile 100A three-phase plasma cutting package supplied with an integrated compressor and trolley. It gives professional fabricators a self-contained cutting system where workshop compressed air is unavailable, without sacrificing CNC capability or advanced digital control.
ClearVision display technology, SurePlasma non-HF ignition and 2T, 4T and mesh-cutting modes support fast, repeatable setup. The standard 14-pin CNC interface allows use with suitable mechanised systems. With its integrated air system, the machine is rated for a 25mm clean cut in carbon steel at 400mm/min, a 35mm severance cut and a 20mm pierce capacity.
Key specifications:
• 400/415V three-phase input
• 20–100A output range
• 40% duty cycle at 100A and 40°C
• 25mm clean cut; 35mm severance cut
• 20mm pierce capacity
• Integrated compressor and trolley
Package contents:
• EVO CUT 100SC power source
• Integrated compressor and trolley
• 6m UPH-125 cutting torch
• 3m earth clamp and lead
The Jasic EVO CUT 100SC is a mobile 100A three-phase plasma cutting package supplied with an integrated compressor and trolley. It gives professional fabricators a self-contained cutting system where workshop compressed air is unavailable, without sacrificing CNC capability or advanced digital control.
ClearVision display technology, SurePlasma non-HF ignition and 2T, 4T and mesh-cutting modes support fast, repeatable setup. The standard 14-pin CNC interface allows use with suitable mechanised systems. With its integrated air system, the machine is rated for a 25mm clean cut in carbon steel at 400mm/min, a 35mm severance cut and a 20mm pierce capacity.
Key specifications:
• 400/415V three-phase input
• 20–100A output range
• 40% duty cycle at 100A and 40°C
• 25mm clean cut; 35mm severance cut
• 20mm pierce capacity
• Integrated compressor and trolley
Package contents:
• EVO CUT 100SC power source
• Integrated compressor and trolley
• 6m UPH-125 cutting torch
• 3m earth clamp and lead
Technical data
Technical specifications
| Air requirement | Integrated compressor; 150 l/min @ minimum 3 bar |
|---|---|
| Maximum output | 100A |
| Arc ignition | Non-HF pilot arc |
| Clean cut capacity | 21–30 mm |
| Clean cut capacity details | 25mm carbon steel @ 400mm/min |
| Cnc interface | 14-pin CNC interface |
| Compressor included | Yes |
| Current range | 20–100A |
| Cutting modes | 2T, 4T, mesh cutting |
| Dimensions (L × W × H) | 626 × 230 × 734mm |
| Duty cycle | 100A @ 40% (40°C) |
| Generator requirement | AVR generator compatible; size for 18kVA rated input |
| Input supply details | 3-phase AC 400V ±15%, 50/60Hz |
| Minimum order quantity | 1 |
| Pierce capacity | 20mm carbon steel |
| Protection class | IP23S |
| Severance cut capacity | 35mm carbon steel |
| Torch length | 6m |
| Torch model | UPH-125 |
| Input voltage | 400/415V |
| Weight | 44kg |
| Welding processes | Plasma cutting |